Start creating today

Start Resin Art
at Home
Even as a Beginner

No experience needed. No studio. No expensive classes. Just our kit, your table, and your first finished piece in 48 hours.

First product guaranteed in 48 hours
3:1 ratio resin included
UV resin kit available
Ships across India
Resin Art Products
First product ready in
48 Hours
even on your first try
3:1 Resin Kit
What is resin art

Liquid art that hardens into glass

Mix two liquids, pour into a mould, and in 48 Hours you have a glossy, glass-like piece that looks professionally made. No art background needed.

  • Finished pieces look and feel like glass
  • Easy enough to learn in one afternoon
  • Can grow into a hobby or a home business
What you can create

One kit. Endless possibilities.

From beginner-friendly keychains to stunning wall art, all from the same kit.

Materials required

Everything you need, nothing you do not

Our beginner kit includes all of this. Nothing extra to source or figure out.

  • Resin and Hardener 3:1 ratio
  • Moulds-Alphabet, Pendent, Earring, Coaste & more
  • Mixing cups and sticks
  • Gloves
  • Mica, Glitters , Flakes & Colors Pigments
  • UV resin, Bezels Set, UV light & UV Tape
Beginner Kit
Ready to go from day one
Everything measured, packed, and labelled. Open the box and start creating the same day.
  • 3:1 Epoxy Resin Kits
  • UV Resin Kit for fast cure projects
  • ALphabet, Pendant, Earring, Coaster & Bookmark silicone moulds
  • Mica, Glitters , Flakes & Colors Pigments
  • Flowers, Sticker, Earring & Keychain
Get the Kit
Before you start

Stay safe. Create confidently.

Four simple rules. Takes 30 seconds to read, saves you every time.

Open space only
Work near a window or outdoors. Fresh air is important when working with resin.
Always wear gloves
Resin is sticky and can irritate skin. Gloves are included in your kit.
Do not touch uncured resin
Wait the full 48 hours. Touching early ruins the surface finish.
Keep your area clean
Lay newspaper on your table before you pour. Resin drips are hard to remove.
Step by step

Your first resin piece, start to finish

Seven steps. That is all it takes to go from liquid resin to a finished product in your hands.

1
Prepare your workspace
Cover your table, open a window, and put on your gloves before touching anything
2
Measure resin and hardener
3 parts resin to 1 part hardener. Use the measuring cup included in your kit
3
Mix slowly
Stir for 3 to 5 minutes. Slow and steady prevents bubbles from forming
4
Add your color
A few drops of pigment is all you need. Less is more, especially for beginners
5
Pour into the mould
Pour slowly from low height to avoid trapping air pockets inside
6
Remove bubbles
Pass the heat tool quickly over the surface. Bubbles pop instantly.
7
Let it cure for 48 hours
Leave flat, do not touch. Wake up to a finished, glass-like piece.
Common mistakes

Do not do this

Five mistakes every beginner makes. Read this once and avoid all of them.

Wrong ratio
Always 3:1. More or less and your piece will stay sticky
Mixing too fast
Fast mixing traps air bubbles. Slow and steady always wins
Too much color
Overloading pigment stops the resin from curing properly
Touching early
Touching uncured resin leaves permanent fingerprints. Wait 48 hours.
Humid environment
Moisture prevents curing. Always work in a dry, ventilated space
Your first project
Make Your First Keychain

Five steps. Under an hour of active time. A finished piece you can hold, gift, or even sell.

Mix
Add color
Pour
Add glitter
Cure
Try This Now
Your resin journey

From first keychain to wall art

Every expert started exactly where you are right now.

Beginner
Keychains
Earrings, Bookmarks, Small jewellery
Intermediate
Coasters
Geode art, Jewellery trays, Wall clocks
Advanced
Trays and Panels
River tables, Large wall art, Custom orders
Limited time

Start Your
Resin Journey
Today

Everything you need is in one box. Delivered to your door, anywhere in India.

50K+ Kits Sold
3:1 and UV resin included
Ships across India
WhatsApp support